green&clean multi-rinse Rack Type Dishwasher, Energy Saving Device, electric, 300 r/h, right>left 535012
Adjustable feet for full access underneath the machine for cleaning.
Deep drawn pressed wash tank with fully rounded corners, sloped towards the drain to prevent dirt build up provides fast drainage in only a few minutes. Pressed wash tank with no welded points offer a guaranteed water tight solution.
Large counter balanced inspection doors allow unrestricted all-round access to the wash and rinse area. Door is insulated with injected foam. This adds strength as well as reduces noise and heat loss.
Self-draining wash pumps provide maximum hygiene and all wash and rinse zones drain automatically at the push of a button.
IP25 protection against water jets, solid objects and small animals (larger than 6 mm).
Built-in drain valve in the tanks allows automatic dump and fill to refresh the water in the tank without any interruption of the washing process.
Built-in Energy Saving Device (ESD) utilizes the hot steam generated by the machine in the rinse and wash tanks to heat up incoming cold water up to 55°C before entering the boiler, thus saving energy.
Multi-rinse technology guarantees rinse water consumption of 0.4 liters/rack regardless of the conveyor speed to ensure low energy, water, detergent and rinse aid consumption.
CLEAR BLUE filtering system removes soil from the wash water providing cleaner water and highly active detergent thus ensuring better washing performance and lower running costs.
Built-in WASH-SAFE CONTROL system raises water temperature to 85°C to sanitize the rinse water. No external boiler is required. Built-in air break and rinse booster pump ensure constant temperature and pressure throughout the rinsing cycle regardless of the inlet water condition.
Three conveyor speeds can be selected through the control panel by the operator and customized on site.
Pre-wash section uses cold water so food remains are not "baked" onto the plates in order to have better pre-wash performance.
Multi-rinse arms in combination with double rinse tanks re-use final rinsing water in several phases to ensure hygiene and complete detergent removal on the washed wares.
Auto-start/stop equipped in different zones ensures that the zone runs only when a rack is passing through it. This reduces water, energy, chemical consumption and noise.
Intuitive touch screen control panel features user-friendly display to easily operate the machine and to monitor machine status. Three different levels of interaction are available each show relevant messages and information to the operator, the general maintenance staff and the authorized service partners.
Automatic drain, clean and sanitize cycles featured as standard. The internal chambers, including the internal doors are completely cleaned or sanitized avoiding bacteria proliferation for maximum hygiene and reducing manual work/time for operator.
All internal components: wash and rinse arms, tank filters, curtains can be easily removed for cleaning.
Splashhood at the entrance avoids water spilling outside the machine.
Unit equipped with USB port making it simple to read data such as machine identification, counters and consumption, components, devices and alarm logs. Machine parameters can be uploaded and downloaded and firmware updated.
Maximum capacity per hour of 300 racks easy to switch to DIN 10510 or NSF ANSI 3 compliant speed.
Maximum Water Contact (MWC) wash arms are positioned along the full length of the wash tank.
Automatic back-up mode is activated when a failure occurs. Guided troubleshooting for fast fixes including 300 precises notifications and 23 easy-to-follow processes.
Modularity design allows the machine not only be disassembled for delivery and re-assembled at customer’s site, but also to be customized and upgraded on-site and over time.
Dishwasher structure is held together with a solid 50 x 50 mm stainless steel frame to provide long-term sturdiness.
All electric components are put in one IP65 central box isolated from water and steam to ensure high reliability.
External pre-arrangement for inlet water, drain water, detergent & rinse aid connections for fast and easy installation on both sides of the unit.
The unit is built on modularity concept for easy to add pre-wash, wash and up to 2 dryer modules onsite.
All chambers without internal pipes and therefore no hidden dirt traps.
All main components made in heavy duty anti-corrosive 304 type stainless steel: external front, side panels and internal chambers, wash and rinse arms, doors and rack transportation system.
- Supply voltage: 380-415 V/3N ph/50 Hz
- Default Installed Power: 33.2 kW
- Electrical power min: 26.2 kW
- When the machine runs at DIN 10510 compliant speed.
- Energy consumption: 27.9 kW/h
- At average working conditions.
- Pre-wash tank heating elements: 7 kW
- 2nd pre-wash tank heating elements: 14 kW
- Wash tank heating elements: 14 kW
- Triple tank heating elements: 7 kW
- Boiler heating elements: 7 kW
- Pre-wash pump size: 0.37 kW
- 2nd pre-wash pump size: 1.5 kW
- Wash pump size: 1.5 kW
- Rinse pump size (final, duo, triple): 0.55 / 0.32 / 0.32 kW
- Rinse water consumption at max. speed (l/rack)*: 0.4
- Rinse water consumption at max. speed (l/h) **: 120
- Productivity per hour (max speed): 300 racks / glasses
- Productivity per hour (2° speed): 201 racks
- Productivity per hour (1° speed): 183 racks / 3294 dishes
- Height with door open: 2095 mm
- Charging hole size (width): 530 mm
- Charging hole size (height): 490 mm
- Pre-wash temperature: 10 - 40 °C
- 2nd pre-wash temperature: 10 - 10 °C
- Wash temperature: 55 - 65 °C
- Triple rinse temperature: 70 - 75 °C
- Duo rinse temperature: 75 - 80 °C
- Final rinse temperature: 85 °C
- External dimensions, Width: 3530 mm
- External dimensions, Height: 1785 mm
- External dimensions, Depth: 895 mm
- For transportation purpose only, the depth can be reduced to 795mm by removing the control box and the door handles.
- Net weight: 663 kg
- Shipping weight: 758 kg
- Shipping height: 1970 mm
- Shipping width: 1040 mm
- Shipping depth: 4000 mm
- Shipping volume: 8.2 m³
- Noise level: 58 dBA
- Reference norm used to measure the noise: IEC60335-2-58 annex AA.
- Table to table distance: 3530 mm
- Inlet water line size: G 3/4"
- Inlet cold water line size: G 3/4"
- Drain line size: 50mm
- Inlet water supply pressure: 1.5-7 bar
- Inlet water supply temperature (wash): 5 - 65°C
- The higher the temperature, the faster the warm-up.
Recommended temperature: 50°C.
- Inlet water supply temperature (rinse and pre-wash): 5 - 30 °C
- Inlet water supply hardness: 0-14 °fH / 0-8°dH
- When below 7°fH/4°dH special detergent and rinse aid are needed.
- Flow rate of wash pump: 500 l/h
- Peak rate of drain flow: 1.8 l/s
- Pre-wash tank size: 35 l
- 2nd pre-wash tank size: 70 l
- Wash tank size: 70 l
- Duo rinse tank size: 20 l
- Triple rinse tank size: 20 l
- Air flow (entrance, exit): 0 / 145 m³/h
- Air temperature (entrance, exit): 0 / 45 °C
- Air humidity (entrance, exit): 0 / 100 % r.h.
- The data is measured at exhaust points at 25°C and 60% r.h. ambient conditions, 18°C inlet water temperature and refer only to the machine.
- Latent heat: 6200 W
- Sensible heat: 5900 W
- This model requires a ventilation hood. Please refer to the attached "Recommended Exhaust Hood Design".
- Range overviews
- Data Sheet
Do you need support
for this product?
Get in touch with one of our Service Partners.
Select on the map your area and get in touch with one of our Sales Partners
Do you own
You may be interested in user manuals. Please login and then click here to find out manuals.
Let us provide more for
Register your product and let us provide you with our best contents and customer care.